Beautiful, graceful & classic are words that come to mind when first viewing the Victorian Lace fireplace insert. This elegant design is finished in rich black nickel plating that has been highlihgted with intricate nickel plated top and bottom convection grills and detailed nickel accents that makes the Victorian Lace one of the most beautiful fireplaces ever designed. The Victorian Lace adds both style to traditional and contemporary homes. The elegant design can be enhanced further with the addition of the optional brushed nickel double doors. Whether left open or closed, the double doors add to the already spectacular fireplace setting. Victorian Lace Fireplace Inserts feature the remarkable Ember-Fyre Burner*. THe patented Ember-Fyre burner and self-balancing flue system produced flames and glowing embers so realistic that Popular Science magazine recently named the Ember-Fyre as one of the year's Top Innovations in Science and Technology.

The Victorian Lace fireplace insert is available in two sizes: DVS - 31,000 BTU & DVL - 40,000 BTU. THe Victorian Lace fireplace insert is designed for installation in either metal (Zero Clearance) or masonry fireplaces that can be serviced with a gas line.

Victorian Lace fireplace Inserts come standard with a quiet, yet powerful, built-in blower that circulates warm ari throughout your home. THe reliable standing pilot gas valve is designed to operate even when the power goes out. At up to 85 percent efficiency, both "Heater Rated" Victorian Lace fireplace inserts are extremely cost efficient to operate on either natural gas or propane. Options include brushed nickel double doors, decorative brick fireback, wall thermostat and remote control thermostat.

*US Patent #6443726 and other patents pending

Fuel	Variable Input (BTU/Hr.)	Overall Efficiency	AFUE	Heating Capacity	Standing Pilot	Room Fan	Venting
Natural Gas or Propane	NG - Low 18,600 - High 31,000 LP - Low 16,000 - High 31,000	85% NG & 85.5% LP with maximum vent configuration 80% NG & 80.5% LP with minimum vent configuration	71.3% NG & 71.8% LP	Up to 1,500 Sq. Ft.	Heats even when the power is out	130 CFM Standard	3" Flex Duct

Gas appliance performance can be affected by negative pressure in a home and by prevailing atmospheric conditions. Contact local building or fire officials about restrictions and installation requirements in your area. Heating capacity may vary depending on the degree of home insulation, floor plan and the ambient temperature zone of the area in which you live.

Clearance to Combustibles
Please refer to fireplace insert clearance drawing below

Note: Improper installation of your gas appliance or failure to operate in in accordance to the guidelines detailed in the Owner's manual may negate your warranty and endanger your home and family.

Height	19 1/8"
Width	24 3/8"
Depth	15 3/4"
Flue Diameter	2 - 3" Flex Ducts
Unit Weight	112 lbs.

Clearance to Combustibles
Please refer to fireplace clearance drawing below.

A=Faceplate to Mantle	10"
B=Faceplate to Top Facing	8"
C=Faceplate to Sidewall	6"
D=Faceplate to Side Facing	6"
E=Hearth Extension Front	12"
F=Hearth Extension Side	0"

DVS Facing Panel Selections
Please review the below information to determine which best meets your needs.

Standard DVS Rectangular Panels (Black Trim included)
8" x 10" Panels - 28 7/8" H x 40 3/8" W
10" x 13" Panels - 31 7/8" H x 44 38/8" W

Inside Fit Panels (No trim)
Oversized, cut to fit fireplace opening. Maximum fireplace opening: 44 5/16" W x 31 7/8" H

DVS Zero Clearance Bottom Panel (Trim included)
Bottom panel designed to be trimmed and used with Rectangular Panels to finish off appearance of installation when the fireplace is elevated. 7" maximum height.

Face Dimensions:
Craftsman DVS Face Dimensions: 21 1/2" Tall x 32" Wide
Glas Fire Viewing Area: 262 Sq. In.

Safety Testing
Tested and Certified by OMNI-Test Laboratories Inc. ANSI Z21.88/CSA 2.33-1998, applicable sections of UL 307b, and CAN/CGA 2.17-M91.
Must be installed in accordance with all local codes, if any; if not, follow ANSI Z223.1 & BFOA 54(88) and the requirements lited in the Owner's Manual.