40,000 BTU DVL (Direct Vent Large) Fireplace Insert

The contemporary look of the Avalon Rosario™ DVL gas insert's clean, flush lines and 24 karat gold plated framed window makes a beautiful yet economical heating statement for any home. Made from the highest quality materials and heavy gauge steel the Rosario DVL insert is designed for exceptional heat transfer.

Beauty and performance are the trademark features of the Rosario DVL. From the huge fireview (437 sq. in.) to the incredibly realistic "Fire-Pit" log and beautiful fire, you have to look hard to be convinced the flame is not a wood fire. As for performance, the Rosario DVL is designed to heat up to 2,000 square feet and provide cost-saving efficiencies of up to 83.6%* for natural gas and 86% for propane.

The Rosario DVL Insert will transform your drafty masonry or metal, zero clearance fireplace into the focal point of your home. It circulates warm air throughout your home using a quiet, powerful built-in blower (yet can provide heat even if the power goes out). The Rosario DVL is the ideal choice for heating medium to large homes.
*with maximum vent configuration

Options

• Cast aluminum Fireback with brick pattern
• Wall Thermostat
• Remote Control Thermostat
• Wall Switch

Performance and Specifications

• The Rosario DVL insert is designed to be installed in existing metal (ZC) or masonry fireplaces that have access to gas.
  
• Our One-Piece "Fire-Pit™" log set was hand-carved and patterned after an actual partially burned log. The "Fire-Pit" log set allows more flame visibility and the perfect balance of fire and glow.
  
• Heater rated, the Rosario DVL is so efficient that in many places it can be used as your primary heat source.
  
• Utilizes a standing pilot system which does not require electricity to operate. This allows your insert to continue to provide heat even if the power goes out.
  
• A unique "Tri-Level tube burner provides a flame so realistic you'd swear it was a wood fire. The Rosario DVL insert ships with a natural gas burner installed, and includes an easy-to-convert propane conversion kit.
  
• The Rosario is designed to utilize inexpensive flex duct that allows you to vent through your existing chimney.
  
• A 30 second pilot gas drop-out switch adds safety by shutting off the gas flow if the flame goes out.
  
• Quiet, 130 CFM convection blower is standard and adds increased warm air circulation throughout your home.
  
• The Rosario comes with two-tone brick pattern floor.

Rosario™ Direct Vent Large Gas Fireplace Insert

Fuel Natural Gas or Propane

Variable Input (BTU/Hr.) NG - Low 21,700 - High 40,000 LP - Low 23,200 - High 40,000

Overall Efficiency 83.6% NG & 86% LP with maximum vent configuration 78.9% NG & 81%LP with minimum vent configuration

AFUE 71% NG 73.7%LP

Heating Capacity Up to 2,0000 Sq. Ft.

Standing Pilot Heats even when the power's out

Room Fan 130 CFM Standard

Direct Vent 3" Flex Duct Incoming Air & 4" Flex Duct Exhaust

Gas appliance performance can be affected by negative pressure in a home and by prevailing atmospheric conditions. Contact local building or fire officials about restrictions and installation requirements in your area. Heating capacity may vary depending on the degree of home insulation, floor plan and ambient temperature zone of the area in which you live.

Clearance to Combustibles

Note: Improper installation of your gas appliance or failure to operate it according to the guidelines detailed in the Owner's Manual may negate your warranty and endanger your home and family.

Fireplace Insert Height 23 ¾" Width 32 ¼" Depth 16" Flue Diameter Air intake 3" Exhaust 4" Glass Area 27 ¾"w 15 ¾"H Unit Weight 125 lbs.

Clearance to Combustibles A = Face to Mantle 10" B = Face to Top Facing 8 ½" C = Face to Sidewall 6" D = Face to Side Facing 6" E = Hearth Extension Front 12" F = Hearth Extension Side 0"

Panel Sizes:

Please review the information to determine which panel size best meets your needs.
8" x 10" Panels = 33 3/8" H x 44 3/16"W
10" x 13" Panels = 36 3/8"H x 48 3/16"W
Note: All panel kits include panels, brass trim and standoffs.

Please review the information to determine which panel size best meets your needs. Note: Improper installation of your gas appliance or failure to operate it according to the guidelines detailed in the Owner's manual, may negate your Warranty and endanger your home and family. Contact local building or fire officials about restrictions and installation requirements in your area.

Sizing Your Fireplace Insert Minimum Dimension 1=Depth of Fireplace 16" 2=Width in Front 38 1/4"* 3=Width at Back 17 3/8" 4=Height of Opening 23 3/4" 5=Hearth Extension 12" *Includes an additional 6" for gas line connection