![]() |
P61 Pellet Stove
The P61 will provide the exact amount of heat necessary to heat your home to the desired temperature. The temperature remains constant without all the ups and downs that happen with other brands of pellet stoves. The P61 does not use a thermostat as do other pellet stoves, but rather a tiny sensing probe that sends information to the microprocessor on the stove. This information is used to feed the proper amount of fuel at the right time to keep you warm and comfortable. The P61 also has a Stove Temp Mode that allows you to set the stove temperature as desired rather than the room temperature.
Performance
Convenience
Value
Features
Specifications:
The P61 has the widest heating range of any pellet stove. It is able to burn from 8,000 BTU's to over 61,000 BTU's. The combustion system of the stove consists of the Pellet Pro Feeder and Burn Pot. Each is covered by a U.S. Patent making them exclusive to Harman. The P61 can burn any brand of wood pellets regardless of the ash content. This allows you to buy lower cost pellets and achieve the same results for less. Our exclusive accordion heat exchanger and air-cooled blower housing make it possible for the P61 to produce maximum heat without excessive exhaust temperatures. Efficiency can be further enhanced by using 100% outside air for combustion and keeping the glass clean.
The P61 can burn up to three days on one hopper full of pellets. Ash removal is quick, easy, and can be done while the stove is in operation. Normally ashes need only be removed every one to two months.
To perform annual cleaning, simply unlatch and remove the blower cover located behind the ash pan. Now the venting system can be easily cleaned with a vacuum cleaner and brush.
No pellet stove is easier to operate, clean, or maintain than the P61. Simply set the dial on the ESP Control and the P61 will do the rest.
The P61 costs less to buy than other brands that only produce 40,000 BTU's. Since the P61 adjusts automatically to produce the correct amount of heat, it is the best choice even if you never need 61,000 BTU's.
This is possible because we use lasers to cut only the finest American-made steel.
Then form it with the most accurate forming equipment available. The complete stove is then welded by the most advanced robots currently produced.
More compact in size, wider heating range, easier to use and maintain, all for less money. That's Real Value. That's the Harman Difference!
Options
| BTU Range | 8,000 to 61,000 |
| Heating Capacity | 2,000+ sq. ft |
| Hopper Capacity | 72 lbs. |
| With optional hopper extension | 132 lbs. |
| Fuel | Bio-Mass Pellets |
| Blower Size | 135 CFM |
| Fuel Size | 3 in. |
| Outside Air Size | 2-3/8 in. |
| Fuse Rating | 3 amp |
| Weight | 249 lbs. |
| Depth | 29-1/2 in. |
Clearances and Dimensions:
Safety Testing
(by Warmock Hersey): ASTM E1509 Mobile Home-approved
©Copyright, Warming Trends, Inc., All Rights Reserved
Web Page Design and Hosting by Onalaska Web