Harman P61A Pellet Stove

HARMAN
The P61A Pellet Stove
Harman P61A Pellet Stove

The Harman P61A Pellet Stove relies on state-of-the-art technology to automatically adjust itself to your desired room temperature. Simply pour your pellets into the convenient top-loading hopper and set the temperature dial on your P61A. If the room is much cooler than the set temperature, the P61A will produce a large fire in order to quickly reach the desired temperature. If only a slight increase is needed, the P61A will burn a small fire. This way, no energy is wasted by overshooting your predetermined temperature level.

In addition to adjusting temperature levels, the P61A will automatically adjust itself for fuel quality. An ESP (Exhaust Sensing Probe) analyzes the output of the fuel being burned and adjusts the feed rate accordingly to increase fuel quality.

The P61 models have the widest heating range of any pellet stove. The P61A can burn any brand of wood pellet regardless of the ash content. This allows you to buy lower cost pellets and achieve the same results for less.

The P61A’s high efficiency allows you to burn less fuel to heat the same area as the competitor’s stoves. Since the stove adjusts automatically to produce the correct amount of heat, it is the best choice even if you never need 61,000 BTUs. Ash removal is quick, easy, and can be done while the stove is in operation. Normally ashes need only be removed every one to two months.

To perform annual cleaning, simply unlatch and remove the blower cover located behind the ash pan. Now the venting system can be easily cleaned with a vacuum cleaner and brush.

Features

  • ESP Control
  • Room Sensor
  • Patented Feeder
  • Patented Burn Pot
  • Large Ash Pan
  • Swing Open Ash Door
  • Accordion Heat Exchanger
  • Air-Cooled Combustion Blower
  • Super Easy Cleaning
  • More than 100 Square Inches Of Glass
  • P61A Automatic Ignition

Specifications

  • Fuel: Bio-Mass Pellets
  • BTU Range: 0 to 61,000
  • Heating Capacity: 2,000+ sq ft
  • Hopper Capacity: 72 lbs
  • Blower Size: 135 cfm
  • Flue Size: 3 inches
  • Outside Air Size: 2-3/8 inches
  • Fuse Rating: 5 amp
  • Weight: 249 lbs
  • Depth: 29-1/2 inches
  • Height: 34-1/2 inches
  • Width: 23-1/2 inches
  • Testing: Safety Testing (by Warnock Hersey) ASTM E1509
  • Mobile Home-Approved

CLEARANCES TO COMBUSTIBLES

 P61A clearances