The beautifully proportioned, hand-hammered Craftsman^TM style face was designed by renowned designer John Caldwell. With its riveted straps and classic hood, it is a fine tribute to the turn-of-the-century work of Arts & Crafts architects. As part of the Avalon Mission Collection, the Craftsman is designed to appeal to both Arts & Crafts and traditional home decor. The timeless Craftsman design comes painted in rich metallic brown, but can easily be painted in a wide variety of custom colors to match your home's lifestyle and home decor.

Craftsman fireplace Inserts features the remarkable Ember-Fyre^TM Burner*. The patented Ember-Fyre burner and self-balancing flue sytem produce flames and glowing embers so realistic that Popular Science® magazine recently named the Ember-Fyre as one of the year's Top Innovations in Science and Technology.

The Craftsman fireplace Insert is available in two sizes DVS - 31,000 BTU & DVL - 40,000 BTU. The Craftsman fireplace Insert is designed for installation in either metal (Zero Clearnace) or masonary fireplaces that can be serviced with a gas line.

Craftsman fireplace Inserts come standard with a quiet, yet powerful, built-in blower that circulates warm air throughout your home. The reliable standing pilot gas valve is designed to operate even when the power goes out. At up to 85 percent efficiency, both "Heater Rated" Craftsman fireplace inserts are extremely cost efficient to operate on either natural gas or propane. Options include decorative Brick Fireback, Wall Thermostat and Remote Control Thermostat.

*US Patent #6443726 and other patents pending

Fuel	Variable Input (BTU/Hr.)	Overall Efficiency	AFUE	Heating Capacity	Standing Pilot	Room Fan	Venting
Natural Gas or Propane	NG - Low 20,700 - High 40,000 LP - Low 17,900 - High 40,000	83.6% NG & 86% LP with maximum vent configuration 78.9% NG & 81% LP with minimum vent configuration	71% NG & 73.7% LP	Up to 2,000 Sq. Ft.	Heats even when the power is out	130 CFM Standard	3" & 4" Flex Duct

Gas appliance performance can be affected by negative pressure in a home and by prevailing atmospheric conditions. Contact local building or fire officials about restrictions and installation requirements in your area. Heating capacity may vary depending on the degree of home insulation, floor plan and the ambient temperature zone of the area in which you live.

Clearance to Combustibles
Please refer to fireplace insert clearance drawing below

Note: Improper installation of your gas appliance or failure to operate in in accordance to the guidelines detailed in the Owner's manual may negate your warranty and endanger your home and family.

Height	23 3/4"
Width	32 1/4"
Depth	16"
Flue Diameter	Air intake 3" Exhaust 4"
Unit Weight	112 lbs.

Clearance to Combustibles
Please refer to fireplace clearance drawing below.

A=Faceplate to Mantle	10"
B=Faceplate to Top Facing	8 1/2"
C=Faceplate to Sidewall	6"
D=Faceplate to Side Facing	6"
E=Hearth Extension Front	12"
F=Hearth Extension Side	36"

DVL Facing Panel Selections
Please review the below information to determine which best meets your needs.

Standard DVS Rectangular Panels (Black Trim included)
8" x 10" Panels - 33 3/8" H x 44 3/16" W
10" x 13" Panels - 36 3/8" H x 48 3/16" W

Inside Fit Panels (No trim)
Oversized, cut to fit fireplace opening. Maximum fireplace opening: 48 3/16" W x 36 3/8" H

DVS Zero Clearance Bottom Panel (Trim included)
Bottom panel designed to be trimmed and used with Rectangular Panels to finish off appearance of installation when the fireplace is elevated. 7" maximum height.

Face Dimensions:
Craftsman DVL Face Dimensions: 27 1/2" Tall x 36" Wide
Glas Fire Viewing Area: 426 Sq. In.

Safety Testing
Tested and Certified by OMNI-Test Laboratories Inc. ANSI Z21.88/CSA 2.33-1998, applicable sections of UL 307b, and CAN/CGA 2.17-M91.
Must be installed in accordance with all local codes, if any; if not, follow ANSI Z223.1 & BFOA 54(88) and the requirements lited in the Owner's Manual.